USA
Sideshifters

Sideshifters

Print
Komatsu
Komatsu
MODEL

Capacity
Lbs.
Load
center
Carriage
Width
Mounting
Class
Total
Stroke
Min. Carriage
width
Weight

Effective
Thickness
Horizontal
center of
gravity
Vertical
center of
gravity
QBPISFLWLLHCGVCG
Lbs. Lbs.
HN4 31075,50024"31.0"II8"28.4"932.4"1.0"8.1"
HN4 34275,50024"34.6"II8"28.4"1002.4"1.0"8.1"
HN4 36275,50024"36.6"II8"32.7"1042.4"1.0"8.1"
HN4 37075,50024"37.0"II8"32.7"1062.4"1.0"8.1"
HN4 41075,50024"41.0"II8"32.7"1142.4"1.0"8.1"
HN4 49075,50024"49.0"II8"37.8"1882.6"1.1"8.1"
HN4 53075,50024"53.0"II8"39.2"2002.6"1.1"8.1"
HN4 61075,50024"61.0"II8"43.3"2562.6"1.1"8.6"
HN5 37076,50024"37.0"III8"29.9"1332.6"1.0"9.0"
HN5 38276,50024"37.8"III8"29.9"1352.6"1.0"9.0"
HN5 41076,50024"41.0"III8"35.0"1442.6"1.0"9.0"
HN5 42276,50024"41.7"III8"35.0"1452.6"1.0"9.0"
HN5 49076,50024"49.0"III8"42.9"1652.6"1.0"9.0"
HN5 53076,50024"53.0"III8"42.9"1752.6"1.0"9.0"
HN6 423710,00024"42.1"III8"33.5"2373.0"1.3"10.3"
HN6 463710,00024"46.8"III8"35.5"2603.0"1.3"10.3"
HN6 623710,00024"62.2"III8"47.3"3283.0"1.3"10.3"
HN6 683710,00024"68.1"III8"61.0"3973.0"1.3"11.0"

Notes:

  • One hydraulic function.
  • Last two digits in the model number determine load backrest drill pattern: (07) two bolts per side-side drilled. / (27) two bolts per side-side drilled. / (37) four bolts per side-side drilled.
  • OSHA or state regulations may require the installation of backrests. We suggest that you check your use of sideshifters against these requirements.

Options: