USA
Clamps

Clamps

Print
Models LB-N (Non-Sideshifting)
Models LB-N (Non-Sideshifting)
MODEL

Capacity
@ 24"
Load center
Mounting
Class
Frame
width
Opening
Range
Opening
Range
Arm
dimensions
Arm
dimensions
Arm
dimensions
Weight

Effective
Thickness
Horizontal
load center
Vertical
load center
Height

Min.
carriage
width
Arms
toe-in
Arm
height from
ground
Ground
clearance
QIB minB maxLAEWLLHCGVCGDFLCEP
Lbs.Lbs.
LB 10 N7A1,800II46.0"31.4"88.5"51.1"21.6"2.7"7825.9"10.3"9.3"24.1"29.5"0.7"1.1"0.4"
LB 10 N8A1,800II46.0"31.4"88.5"59.0"21.6"2.7"8155.9"12.2"9.3"24.1"29.5"0.8"1.1"0.4"
LB 10 N9A1,800II46.0"31.4"88.5"70.8"21.6"2.7"8705.9"15.4"9.2"24.1"29.5"0.9"1.1"0.4"
LB 10 N0A1,800II46.0"31.4"88.5"78.7"21.6"2.7"9035.9"17.6"9.2"24.1"29.5"1.1"1.1"0.4"
LB 14 N7A2,500II46.0"31.4"88.5"51.1"21.6"2.7"8006.0"10.2"9.3"24.1"29.5"0.7"1.1"0.4"
LB 14 N8A2,500II46.0"31.4"88.5"59.0"21.6"2.7"8336.0"12.0"9.3"24.1"29.5"0.8"1.1"0.4"
LB 14 N9A2,500II46.0"31.4"88.5"70.8"21.6"2.7"8886.0"15.3"9.2"24.1"29.5"0.9"1.1"0.4"
LB 14 N0A2,500II46.0"31.4"88.5"78.7"21.6"2.7"9216.0"17.5"9.2"24.1"29.5"1.1"1.1"0.4"
LB 18 N8A3,200II59.8"28.3"96.4"59.0"21.6"2.7"9036.2"11.0"9.5"24.1"35.0"0.8"1.1"0.4"
LB 18 N9A3,200II59.8"28.3"96.4"70.8"21.6"2.7"9586.2"14.1"9.4"24.1"35.0"0.9"1.1"0.4"
LB 18 N0A3,200II59.8"28.3"96.4"78.7"21.6"2.7"9926.2"16.1"9.4"24.1"35.0"1.1"1.1"0.4"

Notes:

  • One hydraulic function required.
  • Check valve with power regeneration hydraulic circuit.
  • Pressure relief valve.
  • Weld-on arms.
  • Pressure gauge.

Options:

  • Special openings.
  • Quick change lower hooks.
  • Load backrest.
  • Custom built arm dimensions.
  • Flow divider for equal arm movement.
  • Independent arm control valve.