USA
Clamps

Clamps

Print
Models LG-UG
Models LG-UG
MODEL

Capacity

Mounting
Class
Frame
width
Opening
Range
Opening
Range
Arm
dimensions
Arm
dimensions
Arm
dimensions
Arm
dimensions
Weight
Lbs
Effective
Thickness
Horizontal
load center
Vertical
load center
Min.
carriage
width
Height

Arms
toe-in
Side
visibility
Outside
forks
Ground
clearance
QIB minB maxLAETWLLHCGVCGFLDCUZP
Lbs.
LG 22 UGA3,500II38.1"24.0"76.4"35.4"23.6"1.8"2.4"1,40013.0"12.3"11.5"22.8"29.3"0.8"13.3"25.5"0.4"
LG 28 UGB5,000III43.3"24.0"81.4"35.4"23.6"1.8"2.4"2,00013.9"13.2"13.5"27.9"33.9"0.8"15.0"31.5"0.8"

Notes:

  • Two hydraulic functions required.
  • Attachment capacity during rotation is dependent upon the clamping pressure and the type of load.
  • Double check valve.
  • Pressure relief valve.
  • Swivel block.
  • Weld-on arms.
  • With replaceable rubber strips.

Options:

  • Modified opening ranges.
  • Load backrest.
  • Different pad sizes.
  • Quick-change lower hooks.
  • 4-stage pressure relief valve.
  • Independent arm control valve.
  • Pressure gauge.
  • Separate sideshift.Fork requirements: Bolzoni Auramo Gaylord clamp uses standard ITA forks. The forks are not included in the price of this attachment.LG 22 UGA - requires forks 6" longer than useable length.LG 28 UGB - requires forks 8" longer than useable length.