USA
Sideshifters

Sideshifters

Print
Hyster
Hyster
MODEL

Capacity
Lbs.
Load
center
Carriage
Width
Mounting
Class
Total
Stroke
Min. Carriage
width
Weight

Effective
Thickness
Horizontal
center of
gravity
Vertical
center of
gravity
QBPISFLWLLHCGVCG
Lbs. Lbs.
HN4 33055,50024"33.7"II8"28.4"972.4"1.0"8.1"
HN4 33565,50024"33.7"II8"28.4"972.4"1.0"8.1"
HN4 35055,50024"35.7"II8"32.7"1022.4"1.0"8.1"
HN4 35565,50024"35.7"II8"32.7"1022.4"1.0"8.1"
HN4 36055,50024"36.0"II8"32.7"1042.4"1.0"8.1"
HN4 37055,50024"37.5"II8"32.7"1062.4"1.0"8.1"
HN4 38055,50024"38.0"II8"32.7"1092.4"1.0"8.1"
HN4 38565,50024"38.5"II8"32.7"1092.4"1.0"8.1"
HN4 39055,50024"38.5"II8"32.7"1092.4"1.0"8.1"
HN4 42055,50024"42.0"II8"35.9"1162.4"1.0"8.1"
HN4 42565,50024"42.0"II8"35.9"1162.4"1.0"8.1"
HN5 38056,50024"38.0"III8"29.9"1352.6"1.0"9.0"
HN5 39056,50024"38.5"III8"29.9"1362.6"1.0"9.0"
HN5 38566,50024"38.5"III8"29.9"1362.6"1.0"9.0"
HN5 42056,50024"42.0"III8"35.0"1452.6"1.0"9.0"
HN5 42566,50024"42.0"III8"35.0"1452.6"1.0"9.0"
HN5 48566,50024"48.0"III8"42.9"1632.6"1.0"9.0"
HN6 420510,00024"42.0"III8"33.5"2373.0"1.3"10.3"
HN6 476610,00024"47.3"III8"35.5"2643.0"1.3"10.3"
HN6 480510,00024"48.0"III8"35.5"2653.0"1.3"10.3"
HN6 536610,00024"53.3"III8"47.3"2873.0"1.3"10.3"
HN6 541610,00024"54.0"III8"47.3"2913.0"1.3"10.3"
HN6 596610,00024"59.3"III8"47.3"3153.0"1.3"10.3"
HN6 600510,00024"60.0"III8"47.3"3193.0"1.3"10.3"
HN7 421615,00024"42.0"IV8"35.4"3203.3"1.4"19.8"
HN7 476615,00024"47.3"IV8"35.4"3603.3"1.4"19.8"
HN7 481615,00024"48.0"IV8"35.4"3663.3"1.4"19.8"
HN7 536615,00024"53.3"IV8"35.4"4213.3"1.4"19.8"
HN7 541615,00024"54.0"IV8"35.4"4273.3"1.4"19.8"
HN7 596615,00024"59.3"IV8"39.4"4623.3"1.4"19.8"
HN7 601615,00024"60.0"IV8"39.4"4673.3"1.5"19.8"
HN7 721615,00024"72.0"IV8"53.1"5373.3"1.5"19.7"

Notes:

  • One hydraulic function.
  • In case of carriage with tapered ends, please contact Bolzoni Auramo to check side shift compatibility.
  • Last two digits in the model number determine load backrest drill pattern: (05) two bolts per side-face drilled. / (56 & 66) two bolts per side-face drilled. FT series truck. / (16) two bolts per side-side and drilled.
  • Class IV sideshifters have two bolts per side-side and face drill (allows for use of
  • Bolzoni side drilled load backrest).
  • OSHA or state regulations may require the installation of backrests. We suggest that you check your use of sideshifters against these requirements.

Options: