USA
Clamps

Clamps

Print
Models LB-D (Non-Sideshifting)
Models LB-D (Non-Sideshifting)
MODEL

Capacity

Capacity

Mounting
Class
Frame
width
Opening
Range
Opening
Range
Opening
Range
Opening
Range
Fork
dimensions
Fork
dimensions
Fork
dimensions
Weight

Effective
Thickness
Horizontal
load center
Vertical
load center
Height

Min.
carriage
Fork basic
height
Pivot
distance
Ground
clearance
Q1Q2IB1B1BBLAEWLLHCGVCGDFLJKP
Lbs.Lbs.minmaxminmaxLbs.
LB 10 D5A1,8002,500II36.6"24.0"72.4"14.2"62.3"43.3"3.9"1.6"6307.8"7.4"9.5"24.6"27.1"4.5"4.1"0.6"
LB 10 D6A1,8002,500II36.6"24.0"72.4"14.2"62.3"47.2"3.9"1.6"6457.8"8.9"9.3"24.6"27.1"4.5"4.1"0.6"
Forks: max. length 63". Add-on price per each 3.9" length increase.
LB 14 D5A2,5003,200II36.6"23.2"71.6"11.8"60.2"43.3"5.1"1.6"7057.8"8.4"8.7"24.6"27.1"4.7"4.7"0.6"
LB 14 D6A2,5003,200II36.6"23.2"71.6"11.8"60.2"47.2"5.1"1.6"7247.8"10.0"9.6"24.6"27.1"4.7"4.7"0.6"
Forks: max. length 63". Add-on price per each 3.9" length increase.
LB 18 D6A-38W3,2004,150II38.2"28.3"80.7"15.7"68.1"47.2"5.1"1.9"9059.0"11.6"9.9"24.6"27.1"5.7"3.9"0.6"
LB 18 D6A-43W3,2004,150II43.3"21.6"72.4"9.0"59.8"47.2"5.1"1.9"9059.0"10.6"6.0"24.6"27.1"5.7"3.9"0.6"
Forks: max. length 63". Add-on price per each 3.9" length increase.
LB 22 D6A-38W4,0004,700II38.2"28.3"80.7"15.7"68.1"47.2"5.1"1.9"9059.0"11.6"9.9"24.6"27.1"5.7"3.9"0.6"
LB 22 D6A-43W4,0004,700II43.3"21.6"72.4"9.0"59.8"47.2"5.1"1.9"9059.0"10.6"6.0"24.6"27.1"5.7"3.9"0.6"
Forks: max. length 63". Add-on price per each 3.9" length increase.
LB 28 D6B-38W5,0005,800III38.2"28.3"80.7"15.7"68.1"47.2"5.1"1.9"9389.0"10.8"12.2"28.1"27.1"5.7"3.9"1.8"
LB 28 D6B-43W5,0005,800III43.3"21.6"72.4"9.0"59.8"47.2"5.1"1.9"1,0009.0"10.7"12.3"28.1"27.1"5.7"3.9"1.8"
Forks: max. length 63". Add-on price per each 3.9" length increase.
LB 35 D6B-49W6,3006,850III49.2"32.3"91.3"18.5"77.6"47.2"5.9"1.9"1,38010.0"9.3"7.8"28.1"36.6"5.9"4.5"0.8"
LB 35 D6B-45W6,3006,850III45.3"20.8"69.3"7.1"55.5"47.2"5.9"1.9"1,30710.0"9.6"7.8"28.1"36.6"5.9"4.5"0.8"
Forks: max. length 63". Add-on price per each 3.9" length increase.

Notes:

  • One hydraulic function required.
  • Q1 = capacity when clamping.
  • Q2 = capacity on the forks.
  • Check valve.
  • Pressure relief valve.
  • Forks welded to the arm carriers.

Options:

  • Special openings and fork lengths.
  • Quick change lower hooks.
  • Pressure gauge.
  • Load backrest.
  • Slip on arms.
  • Four stage pressure relief valve.
  • Flow divider for equal arm movement.
  • Independent arm control valve.
  • Hydraulically rotating forks.