USA
Sideshifters

Sideshifters

Print
Caterpillar
Caterpillar
MODEL

Capacity
Lbs.
Load
center
Carriage
Width
Mounting
Class
Total
Stroke
Min. Carriage
width
Weight

Effective
Thickness
Horizontal
center of
gravity
Vertical
center of
gravity
QBPISFLWLLHCGVCG
Lbs. Lbs.
HN4 32425,50024"32.3"II8"28.4"962.4"1.0"8.1"
HN4 32525,50024"32.3"II8"28.4"962.4"1.0"8.1"
HN4 36425,50024"36.2"II8"32.7"1042.4"1.0"8.1"
HN4 36525,50024"36.2"II8"32.7"1042.4"1.0"8.1"
HN4 38025,50024"38.3"II8"32.7"1092.4"1.0"8.1"
HN4 39425,50024"39.4"II8"32.7"1102.4"1.0"8.1"
HN4 39525,50024"39.4"II8"32.7"1102.4"1.0"8.1"
HN4 43025,50024"43.4"II8"37.8"1182.4"1.0"8.1"
HN4 44625,50024"44.4"II8"37.8"1182.4"1.0"8.1"
HN4 55425,50024"55.1"II8"41.3"2072.6"1.1"8.1"
HN4 55525,50024"55.1"II8"41.3"2072.6"1.1"8.1"
HN5 37426,50024"37.8"III8"29.9"1352.6"1.0"9.0"
HN5 37526,50024"37.8"III8"29.9"1352.6"1.0"9.0"
HN5 39426,50024"39.4"III8"29.9"1402.6"1.0"9.0"
HN5 39526,50024"39.4"III8"29.9"1402.6"1.0"9.0"
HN5 40026,50024"40.3"III8"35.0"1422.6"1.0"9.0"
HN5 41026,50024"41.5"III8"35.0"1452.6"1.0"9.0"
HN5 43026,50024"43.9"III8"35.0"1502.6"1.0"9.0"
HN5 47026,50024"47.8"III8"42.9"1632.6"1.0"9.0"
HN6 395210,00024"39.4"III8"33.5"2273.0"1.3"10.3"
HN6 410210,00024"41.5"III8"33.5"2353.0"1.3"10.3"
HN6 440210,00024"44.3"III8"33.5"2493.0"1.3"10.3"
HN6 444210,00024"44.3"III8"33.5"2493.0"1.3"10.3"
HN6 464210,00024"46.8"III8"35.5"2603.0"1.3"10.3"
HN6 465210,00024"46.8"III8"35.5"2603.0"1.3"10.3"
HN6 470210,00024"47.8"III8"35.5"2643.0"1.3"10.3"
HN6 594210,00024"59.1"III8"47.3"3153.0"1.3"10.3"
HN6 595210,00024"59.1"III8"47.3"3153.0"1.3"10.3"
HN6 600210,00024"60.0"III8"47.3"3193.0"1.3"10.3"
HN6 610210,00024"61.6"III8"47.3"3263.0"1.3"10.3"
HN6 704210,00024"70.9"III8"61.0"4113.0"1.3"11.0"
HN6 705210,00024"70.9"III8"61.0"4103.0"1.3"11.0"

Notes:

  • One hydraulic function.
  • Last two digits in the model number determine load backrest drill pattern: (20) two bolts per side-face drilled. Please, specify truck model. / (42) four bolts per side-side drilled. / (52) two bolts per side-side drilled. / (62) one bolt per side-face drilled.
  • OSHA or state regulations may require the installation of backrests. We suggest that you check your use of sideshifters against these requirements.

Options: