USA
Sideshifters

Sideshifters

Print
Tusk
Tusk
MODEL

Capacity
Lbs.
Load
center
Carriage
Width
Mounting
Class
Total
Stroke
Min. Carriage
width
Weight

Effective
Thickness
Horizontal
center of
gravity
Vertical
center of
gravity
QBPISFLWLLHCGVCG
Lbs. Lbs.
HN4 31065,50024"31.0"II8"28.4"932.4"1.0"8.1"
HN4 34265,50024"34.0"II8"28.4"992.4"1.0"8.1"
HN4 36265,50024"36.0"II8"32.7"1042.4"1.0"8.1"
HN4 37065,50024"37.0"II8"32.7"1062.4"1.0"8.1"
HN4 38265,50024"38.0"II8"32.7"1092.4"1.0"8.1"
HN4 41065,50024"41.0"II8"32.7"1142.4"1.0"8.1"
HN4 42265,50024"42.0"II8"35.9"1162.4"1.0"8.1"
HN4 48265,50024"48.0"II8"37.8"1862.6"1.1"8.1"
HN4 49065,50024"49.0"II8"37.8"1882.6"1.1"8.1"
HN4 54265,50024"54.0"II8"40.2"2022.6"1.1"8.1"
HN4 60265,50024"60.0"II8"42.3"2522.6"1.1"8.6"
HN5 37066,50024"37.0"III8"29.9"1332.6"1.0"9.0"
HN5 38266,50024"38.0"III8"29.9"1352.6"1.0"9.0"
HN5 41066,50024"41.0"III8"35.0"1442.6"1.0"9.0"
HN5 42266,50024"42.0"III8"35.0"1452.6"1.0"9.0"
HN5 48266,50024"48.0"III8"42.9"1632.6"1.0"9.0"
HN5 49066,50024"49.0"III8"42.9"1652.6"1.0"9.0"
HN5 53066,50024"53.0"III8"42.9"1752.6"1.0"9.0"
HN6 422610,00024"42.0"III8"33.5"2373.0"1.3"10.3"
HN6 423710,00024"42.1"III8"33.5"2373.0"1.3"10.3"
HN6 463710,00024"46.8"III8"35.5"2603.0"1.3"10.3"
HN6 482610,00024"48.0"III8"35.5"2653.0"1.3"10.3"
HN6 542610,00024"54.0"III8"47.3"2913.0"1.3"10.3"
HN6 602610,00024"60.0"III8"47.3"3193.0"1.3"10.3"
HN6 683710,00024"68.1"III8"61.0"3973.0"1.3"11.0"

Notes:

  • One hydraulic function.
  • Last two digits in the model number determine load backrest drill pattern: (06) two bolts per side-side drilled. / (26) one bolt per side-face drilled. / (37) four bolts per side-side drilled.
  • OSHA or state regulations may require the installation of backrests. We suggest that you
  • check your use of sideshifters against these requirements.

Options: